Wood

Production, raw, dried, air-dried wood

Production raw wood is a natural basis for creating a variety of wood products.

Carefully selected, dried and prepared wood ensures high quality, strength and stability, making it perfect for furniture production, interior solutions, construction or decorative projects.

Due to the proper moisture balance and precise processing, this wood retains its shape, does not split and is durable. Production raw material can be used in the production of solid wood, glued wood, parquet boards, table tops, stairs or doors, as well as for paneling, finishing details and exterior structures.

Each blank is a product of natural origin, with a unique texture, pattern and shade. Wood provides the opportunity to create both classic and modern design solutions, while maintaining authenticity and sustainability.

By choosing raw wood for production, you are choosing a high-quality, environmentally friendly and reliable basis for long-lasting products.

Dried wood is wood from which most of the moisture has been removed by natural or artificial means, usually to 8–20% moisture content (depending on the purpose). Drying can be natural (outdoors or in a shed) or industrial (in special dryers).

Freshly cut or already sawn wood is only raw material for further production and processing processes, it becomes a valuable structural material only after most of the moisture has been removed from it, dried in special dryers or naturally. Dried wood is more expensive and its assortment is dominated by a significantly smaller selection of dimensions.

Wood is dried according to its type and intended use, therefore the moisture content of the wood to which the wood must be dried depends on the purpose of the wood. Wood intended for the production of furniture, stairs, railings and other interior products must be dried to 7 - 8%, for construction products - to 18 - 20%, etc.

With us you will find oak, ash, maple and other wood thick boards (slats) and planks for the production of furniture, stairs and other products.

Properties of dried wood:

Lower weight - lighter than green wood, easier to transport and install.

Higher strength and stability - less deformed, split, shrink or expand.

Better durability - more resistant to rot, fungal diseases, insect damage.

More suitable for processing - better suited for cutting, sanding, gluing and painting.

Purpose and methods of use:

1. Construction

Structural elements (beams, rafters, roof trusses)

Floors, wall frames, ceilings

Window and door frames

2. Furniture production

Dried wood is used for the production of tables, cabinets, beds, chairs and other furniture.

It is especially valued for its stability and aesthetics.

3. Interior decoration

Paneling, skirting boards, ceiling finishes

Stairs, railings, doors

4. Outdoor products

Terraces, gazebos, fences, garden furniture (additional protection against moisture is required)

5. Wood products and handicrafts

Sculptures, carvings, musical instruments, decorative elements

Dried wood is a universal, high-quality material, suitable for both structural purposes and aesthetically valuable products. Due to its properties, it is indispensable in many areas - from mass construction to small handicrafts.